Written by:
8/14/2011 1:12 PM 

 Most clogged drains get the chemical treatment. Although chemicals can be very effective in removing blockages, they sometimes only temporarily take care of a problem. Or they don't take care of it at all, which leaves you with pipes full of toxins. First off, try a safer homemade concoction: mix one cup of baking soda, three cups of boiling water, and pour it down the pipes. If this doesn't work, there are many fixes available to you before applying a toxic chemical agent or calling the plumber. Here are some quick tips:

It Won't Flush
When you encounter a clogged toilet, it's often due to built-up tissue paper, but believe it or not, the curiosity of children is the number one reason for most blockages: stray toys often get flushed and consequently stuck. There are two types of clogged toilets: partial, which simply makes the commode run slow, or a full clog. With a full clog, when you flush, it'll look like the bowl will overflow: the waste won't flush and the water level rises above normal. But don't worry; most bowls can hold an extra flush. The problem is people tend to panic as the water level rises and instinctually flush again, which only makes it worse. To avoid overflow, never flush again. But if you do, immediately lift the ball-float in the tank to temporarily stop the flow until you can turn the water completely off.

Clearing a Clogged Toilet
1) Put down towels to avoid any mess. Get a bucket and scoop out excess water from the bowl, but make sure to leave a couple inches in the bottom. 
2) Get a quality toilet plunger (these specific items are cone-shaped to fit in the drain-hole) and plunge repeatedly. The remaining water that you've left in the bowl acts as suction to create enough water pressure to remove blockage. It may not work the first few times, so keep repeating until blockage is removed. 
3) If this doesn't work, you may have to invest in a snake or closet auger. These items are long wires with a corkscrew tip. For a clogged toilet, usually a closet auger works best because it allows you to stand up and the wire easily curves around the first bend of the pipe. You feed the wire into the pipe while turning the auger/snake's handle clockwise until it hits the blockage. Then you keep turning the auger, which allows the tip to screw into the obstruction. Sometimes this will break things up and clear the passageway, but other times the debris will wind onto the tip of the auger so that you're able to actually pull it right back out. 
4) If this doesn't work, you may have to call a plumber for more extensive surgery, which will involve the removal of the entire clogged toilet from the floor.

TrackbackPrint

Tags:

Categories:

Location: BlogsHome ImprovementsPlumbing Services

Your name:
Your email:
	(Optional) Email used only to show Gravatar.
Your website:
Title:
Comment:
Add Comment  Cancel